When starting a piston pump, a few precautions should be taken to ensure safe and efficient operation. Here are some important precautions to keep in mind: 1. Read the manual: Familiarize yourself with the manufacturer's instructions and guidelines provided in the pump manual. Learn about recommended start-up procedures, safety precautions and any specific considerations for your specific displacement pump model. 2. Inspect the pump: Before starting the plunger pump, visually inspect for any signs of damage or wear. Check for loose connections, leaks, or anything unusual. Make sure all safety guards and covers are in place. 3. Verify correct installation: Verify that the plunger pump is properly installed according to the manufacturer's specifications. Make sure suction and discharge lines are connected properly and that all valves and fittings are securely tightened. 4. Prime the pump: If required, ensure that the plunger pump is properly primed with the appropriate fluid before starting. Priming helps remove any air or residual fluid from the pump and ensures proper operation. 5. Safety Equipment: Wear appropriate personal protective equipment (PPE) when operating the plunger pump. This may include goggles, gloves, hearing protection, and any other equipment specified by the manufacturer or relevant safety guidelines. 90-R-130-KA-5-BC-80-L-3-F1-F-03-GBA-26-26-24 90R130KA5BC80L3F1F03GBA262624 90R130-KA-5-BC-80-L-3-F1-F-03-GBA-26-26-24 90R130KA5BC80L3F1F03GBA262624 90-R-130-KA-5-BC-80-L-3-C8-H-03-GBA-42-42-24 90R130KA5BC80L3C8H03GBA424224 90R130-KA-5-BC-80-L-3-C8-H-03-GBA-42-42-24 90R130KA5BC80L3C8H03GBA424224 90-R-130-KA-5-BC-80-L-3-C8-F-04-GBA-42-42-24 90R130KA5BC80L3C8F04GBA424224 90R130-KA-5-BC-80-L-3-C8-F-04-GBA-42-42-24 90R130KA5BC80L3C8F04GBA424224 90-R-130-KA-5-BC-80-L-3-C8-F-03-GBA-35-35-24 90R130KA5BC80L3C8F03GBA353524 90R130-KA-5-BC-80-L-3-C8-F-03-GBA-35-35-24 90R130KA5BC80L3C8F03GBA353524 90-R-130-KA-5-BC-80-D-4-C8-L-04-GBA-42-42-24 90R130KA5BC80D4C8L04GBA424224 90R130-KA-5-BC-80-D-4-C8-L-04-GBA-42-42-24 90R130KA5BC80D4C8L04GBA424224 6. Boot sequence: Follow the recommended boot sequence provided by the manufacturer. This usually involves starting the pump in a specific sequence, such as turning on the power, opening the necessary valves and gradually increasing the speed or pressure. 7. Monitor pressure and flow: After the pump is started, closely monitor the pressure and flow to ensure they are within the specified operating range. Excessive pressure or flow can damage the pump or related equipment. 8. Proper Lubrication: Make sure the plunger pump is properly lubricated according to the manufacturer's instructions. Lubrication helps reduce friction, wear and heat buildup, ensuring smooth operation and extending pump life. 9. Overload protection: Pay attention to the maximum capacity of the pump and avoid exceeding it. Overloading the pump can lead to excessive wear, overheating and even pump failure. Follow the recommended operating parameters and avoid operating the pump beyond its capacity. 10. Emergency stop procedure: Familiar with the emergency stop procedure of the plunger pump. Know how to shut down the pump quickly and safely in an emergency or unexpected situation. 11. Regular maintenance: Implement a regular maintenance plan for the plunger pump, including cleaning, inspection and replacement of worn parts. Proper maintenance helps ensure pump performance, efficiency and reliability. 12. Pressure Relief Valve: Make sure a pressure relief valve is installed in the system and set to the proper pressure limitation. Pressure relief valves protect pumps and systems from overpressure by diverting excess pressure. 13. Avoid dry running: Never start the plunger pump without the necessary liquid in the system. Running dry can cause serious damage to the pump and its components. Always make sure the pump is properly primed with the recommended fluid before starting. 14. Monitor temperature: Pay close attention to the operating temperature of the pump. Overheating can indicate problems such as insufficient lubrication, excessive friction, or a blocked cooling system. If the pump becomes too hot, stop and investigate the cause before continuing. 15. Check for leaks: After starting the plunger pump, carefully inspect the system for any signs of leaks. Pay attention to connections, seals, fittings and hoses. Treat any spills promptly to avoid fluid loss, pressure drop, or safety hazard. 90-R-130-KA-5-BC-80-D-3-C8-L-04-GBA-30-30-28 90R130KA5BC80D3C8L04GBA303028 90R130-KA-5-BC-80-D-3-C8-L-04-GBA-30-30-28 90R130KA5BC80D3C8L04GBA303028 90-R-130-KA-5-BB-80-S-3-F1-F-03-GBA-35-35-20 90R130KA5BB80S3F1F03GBA353520 90R130-KA-5-BB-80-S-3-F1-F-03-GBA-35-35-20 90R130KA5BB80S3F1F03GBA353520 90-R-130-KA-5-BB-80-S-3-C8-H-04-GBA-45-45-24 90R130KA5BB80S3C8H04GBA454524 90R130-KA-5-BB-80-S-3-C8-H-04-GBA-45-45-24 90R130KA5BB80S3C8H04GBA454524 90-R-130-KA-5-BB-80-S-3-C8-H-03-GBA-42-42-24 90R130KA5BB80S3C8H03GBA424224 90R130-KA-5-BB-80-S-3-C8-H-03-GBA-42-42-24 90R130KA5BB80S3C8H03GBA424224 90-R-130-KA-5-BB-80-S-3-C8-H-03-GBA-32-32-24 90R130KA5BB80S3C8H03GBA323224 90R130-KA-5-BB-80-S-3-C8-H-03-GBA-32-32-24 90R130KA5BB80S3C8H03GBA323224 16. Ventilation: Make sure the pump and surrounding area are well ventilated. Displacement pumps generate heat and exhaust during operation, so adequate ventilation will help dissipate heat and maintain a safe operating environment. 17. Be vigilant: Be attentive and vigilant during the operation of the plunger pump. Monitor for any unusual noise, vibration, or changes in performance. If any abnormality is found, shut down the pump immediately and investigate the cause. 18. Training and Operator Competency: Make sure the operator is properly trained and competent to operate the specific model of piston pump. They should understand pump controls, safety features and operating procedures. Regular training and refresher courses help maintain operator proficiency. 19. Emergency shutdown procedure: In addition to the emergency shutdown procedure, a clear and effective emergency shutdown procedure must be established for the plunger pump. These procedures shall include steps to shut down the pump quickly and safely in the event of a hazardous situation or equipment failure. 20. Record keeping: Maintain records of pump operating parameters, maintenance activities, and any incidents or problems that arise. These records provide valuable information for troubleshooting, maintenance planning and future reference. By following these precautions and adhering to the manufacturer's guidelines, you can ensure safe and efficient operation of your displacement pump, minimize the risk of accidents, and extend the life of your pump. Regular inspection, maintenance and training are essential to safe and reliable pump operation.